Guide Through This Manual - Siemens SINAMICS G120 CU240B-2 Operating Instructions Manual

Introduction

1.2 Guide through this manual

1.2 Guide through this manual
In this manual, you will find background information on your inverter, as well as a full
description of the commissioning procedure:
12
①
Should you be unfamiliar with assigning
parameters to the inverter, background
information can be found here:
 Adapting the inverter in line with the
application (Page 15)
 Frequently required parameters (Page 18)
 Extended scope for adaptation (Page 20)
② Information on the inverter hardware can be
found here:
 Modularity of the converter system
(Page 25)
All information relating to the commissioning
of your inverter is located in the following
chapters:
 Procedure for installing the frequency
③
inverter (Page 31)
④  Commissioning (Page 55)
 Configuring the terminal block (Page 93)
 Connection to a fieldbus (Page 103)
⑤  Back-up the settings and transfer
(Page 86)
⑥
Information regarding the maintenance and
diagnostics of your inverter is located in the
following chapters:
 Service and maintenance (Page 237)
 Alarms, faults and system messages
(Page 243)
⑦
The most important technical data for your
inverter is located in this chapter:
 Technical data (Page 261)
Inverter with CU240B-2 and CU240E-2 Control Units
Operating Instructions, 07/2010, FW 4.3.2, A5E02299792B AA