Overview Of Documentation - Siemens SINAMICS G120 CU240B-2 Operating Instructions Manual

1.3

Overview of documentation

Manuals and software are available for every inverter application:
Table 1- 1 Documentation for SINAMICS G120
Planning and configuring
SIZER
engineering tool
Configuration Manual
Selecting geared motors,
motors and inverters
using calculation
examples
Hardware Installation Manual, Power Modules
Comprehensive information on every Power
Module. Available for:
● PM230
● PM240
● PM250
● PM260
Function Manual, Safety Integrated
Comprehensive information about the integrated safety functions of the CU240E-2 Control Unit
Operating instructions
Contains extensive information for most applications. Available for the following Control Units:
● CU230P-2
● CU240B-2 and CU240E-2
● CU240E and CU240S
---
Getting Started
For entry level personnel to switch on the motor for the first time.
Available for Control Units:
● CU230P-2
● CU240B-2 and CU240E-2
● CU240E
● CU240S
---
Inverter with CU240B-2 and CU240E-2 Control Units
Operating Instructions, 07/2010, FW 4.3.2, A5E02299792B AA
Installation and
connection
---
---
---
---
Commissioning
---
---
---
STARTER
Commissioning tool
Parameter Manual
Contains detailed lists of all parameters, alarms and faults as well as
graphic function block diagrams. Available for the following Control
Units:
● CU230P-2
● CU240B-2 and CU240E-2
● CU240E and CU240S
Introduction
1.3 Overview of documentation
Service and maintenance
---
---
Hardware Installation Manual,
Power Modules
(refer to the lefthand column)
---
13