Changing Sson Settings; Performing A Self-Test - Avaya 9608 Installing And Maintaining

Changing SSON settings

About this task
Caution:
Do not perform this procedure if you are using static addressing. Perform this procedure only
if you are using DHCP and the LAN administrator instructs you to do this.
Note:
When updating Craft Procedures from a touch screen phone, touching the line you want to
change or the applicable softkey produces the same result as selecting a line and pressing
the applicable softkey on a non-touch screen IP phone.
Use the following procedure to set the Site-Specific Option Number (SSON).
Procedure
1. Select SSON from the Craft Procedures screen.
The phone displays the following text:
Current setting:
New Setting:
where the setting is the current system value of NVSSON.
2. To change the setting, use the dial pad to enter a valid SSON value between 128 and 255.
3. Press Save to store the new setting and redisplay the Craft Procedures screen.
Related links
Using local Administrative Menu procedures

Performing a self-test

About this task
Note:
9600 series IP deskphone stores two software code images in reprogrammable non-volatile
memory. The primary image, called the "big app" must be running to perform a self-test. The
backup image, called the "little app" does not support the self-test.
Note:
When updating localCraft Procedures from a touch screen deskphone, touching the line you
want to change or the applicable softkey produces the same result as selecting a line and
pressing the applicable softkey on a non-touch screen IP deskphone.
Use the following procedure to perform self-testing:
March 2018 Installing and Maintaining Avaya 9608/9608G/9611G/9621G/9641G/9641GS IP
on page 36
Deskphones H.323
Comments on this document? infodev@avaya.com
Using local Administrative Menu procedures
55