Performing A Self-Test - Avaya B189 Installing And Maintaining

Performing a self-test

About this task
Note:
Avaya B189 Conference IP Phone stores two software code images in reprogrammable non-
volatile memory. The primary image, called the "big app" must be running to perform a self-test.
The backup image, called the "little app" does not support the self-test.
Use the following procedure to perform self-testing:
Procedure
1. Tap or select TEST from the Administration Procedures screen. The phone displays the
following text:
Press Test to confirm.
2. Tap or press Test to start phone testing.
Tap or press Cancel to return to the Administration Procedures screen without testing the
phone.
The test performs the following actions:
The screen glows red, green and blue color consecutively and plays the standard ring tone
with each color change.
The MUTE LED glows blue or red or is off.
After approximately 5 seconds, the top phone screen displays either Self-test passed or Self-
test failed.
3. Press or tap Back to return to the Administration Menu screen.
September 2015 Installing and Maintaining Avaya B189 IP Conference Phone
Comments on this document? infodev@avaya.com
Performing a self-test
37