Web Configuration Pages Definitions; Status Page Definitions; Table 6: Status Page Definitions; Figure 10: Web Http Port - Grandstream Networks HT801 Administration Manual

Web Configuration Pages Definitions

This section describes the options in the HT801/HT802 Web UI. As mentioned, you can log in as an
administrator or an end user.
•
Status: Displays the system info, network status, account status, and line options.
•
Basic Settings: Configures the end user level password, IP address modes, web access, time zone
settings and language.
•
Advanced Settings: Configures networks, upgrading and provisioning, TR-069, security settings,
date and time, syslog, audio settings, call settings and call progress tones.
•
FXS Port (1,2): Configures SIP settings, SIP registration, accounts settings, NAT settings, call features,
ring tones.

Status Page Definitions

Account Status
MAC Address
IPv4 Address
IPv6 Address

Figure 10: Web HTTP Port

Table 6: Status Page Definitions

Shows device ID in hexadecimal format. This is needed by network
administrators for troubleshooting. The MAC address will be used for
provisioning and can be found on the label on original box and on the label
located on the bottom panel of the device.
Displays assigned IPv4 address.
Displays assigned IPv6 address.
HT801/HT802 Administration Guide
Version 1.0.13.7
P a g e | 25