Connecting Ht801/Ht802; Ht801/Ht802 Leds Pattern; Figure 5: Connecting The Ht801/Ht802; Figure 6: Ht801/Ht802 Leds Pattern - Grandstream Networks HT801 Administration Manual

Connecting HT801/HT802

The HT801 and HT802 are designed for easy configuration and easy installation, to connect your HT801
or HT802, please follow the steps above:
1. Insert a standard RJ11 telephone cable into the p hone port and connect the other end of the
telephone cable to a standard touch-tone analog telephone.
2. Insert the Ethernet cable into the internet or LAN port of the HT801/ht802 and connect the other
end of the Ethernet cable to an uplink port (a router or a modem, etc.)
3. Insert the power adapter into the HT801/HT802 and connect it to a wall outlet.
Power, Ethernet and Phone LEDs will be solidly lit when the HT801/HT802 is ready for use.

HT801/HT802 LEDs Pattern

There are 3 LED buttons on HT801 and 4 LED buttons on HT802 that help you manage the status of your
Handy Tone.
HT801
or
HT802

Figure 5: Connecting the HT801/HT802

Figure 6: HT801/HT802 LEDs Pattern

HT801/HT802 Administration Guide
Version 1.0.13.7
P a g e | 18