iLBC Codec Feature
G722 Codec Feature
NAT Settings
If you plan to keep the handy tone within a private network behind a firewall, we recommend using STUN
Server. The following three settings are useful in the STUN Server scenario:
1. STUN Server (under advanced settings webpage) enter a STUN server IP (or FQDN) that you may
have or look up a free public STUN server on the internet and enter it on this field. If using public IP,
keep this field blank.
2. Use random SIP/RTP ports (under advanced settings webpage), this setting depends on your network
settings. Generally, if you have multiple IP devices under the same network, it should be set to Yes.
If using a public IP address, set this parameter to No.
3. NAT traversal (under FXS web page): Set to "Yes" when gateway is behind firewall on a private network.
DTMF Methods
The HT801/HT802 support the following DTMF mode:
•
DTMF in-audio
•
DTMF via RTP (RFC2833)
•
DTMF via SIP INFO
Set priority of DTMF methods according to your preference. This setting should be based on your server
DTMF setting.
Preferred Vocoder (Codec)
The HT801/HT802 support following voice codecs. On FXS ports pages, choose the order of your favorite
codecs:
•
PCMU/A (or G711µ/a)
•
G729 A/B
•
G723.1
•
G726
•
iLBC
•
OPUS
•
G722
Default is Yes
- iLBC Codec: Default is 7201
Default is Yes
- G722 Codec: Default is 722
HT801/HT802 Administration Guide
Version 1.0.13.7
P a g e
|
57