Grandstream Networks HT801 Administration Manual page 38

DDNS Server
DDNS Username
DDNS Password
DDNS Hostname
DDNS Hash
System Ring Cadence
Call Progress Tones:
•
Dial Tone
•
Ringback Tone
•
Busy Tone
•
Reorder Tone
•
Confirmation Tone
•
Call Waiting Tone
•
Prompt Tone
•
Conference Party
Hangup Tone *
Prompt Tone Access Code
Lock Keypad Update
Disable Voice Prompt
Disable Direct IP Call
Selects DDNS Server: dyndns, freedns.afraid.org, zoneedit.com, no-ip.com,
oray.net.
Default is dyndns.
64 characters as Max String Length.
64 characters as Max String Length.
64 characters as Max String Length.
64 characters as Max String Length.
Configuration option is set ring cadence on FXS port for all incoming calls.
Syntax: c=on1/off1-on2/off2-on3/off3; (3 cadences maximum)
Default is set to c=2000/4000; (US standards)
Using these settings, users can configure tone frequencies and cadence
according to their preference. By default, they are set to North American
frequencies.
Configure these settings with known values to avoid uncomfortable high pitch
sounds. ON is the period of ringing ("On time" in 'ms') while OFF is the period
of silence. In order to set a continuous tone, OFF should be zero. Otherwise
it will ring ON ms and a pause of OFF ms and then repeat the pattern.
Example configuration for N.A.
Dial tone:
f1=350@-13, f2=440@-13, c=0/0;
Syntax: f1=freq@vol, f2=freq@vol, c=on1/off1-on2/off2-on3/off3; [...]
(Note: freq: 0 - 4000Hz; vol: -30 - 0dBm)
* "Conference Party Hang-up Tone" will apply only if the "Special Feature" is
set to "MTS".
Key pattern to get Prompt Tone. Maximum 20 digits.
Configuration update via keypad (analog phone connected to FXS port
keypad using IVR menu) is disabled if set to Yes.
Voice prompt is disabled if set to Yes.
Direct IP call is disabled if set to Yes.
HT801/HT802 Administration Guide
Version 1.0.13.7
P a g e | 37