Change Log; Firmware Version 1.0.13.7; Firmware Version 1.0.11.6; Firmware Version 1.0.10.6 - Grandstream Networks HT801 Administration Manual

CHANGE LOG

This section documents significant changes from previous versions of administration guide for
HT801/HT802. Only major new features or major document updates are listed here. Minor updates for
corrections or editing are not documented here.

Firmware Version 1.0.13.7

•
Added ability to support provisioning server path containing the server authentication credentials for
the DHCP option 66. [Allow DHCP Option 66 to Override Server]
•
Added support to send SNMP trap to 3 different servers. [SNMP Trap IP Address]
•
Added feature "Call Features Settings". [Call Features Settings]
•
Added feature "Use SIP User Agent". [SIP User-Agent]
•
Updated "Use SIP User Agent Header" to "SIP User Agent Postfix". [SIP User Agent Postfix].
•
Added feature "Disable Reminder Ring for DND". [Disable Reminder Ring for DND]
•
Added feature "CDR File Option". [CDR File Option]
•
Added feature "SIP File Option". [SIP File Option]
•
Added feature "Disable Weak TLS Cipher Suites". [Disable Weak TLS Cipher Suites]
•
Added feature "Pulse Dialing Standard". [Pulse Dialing Standard]
•
Added feature "Callee Flash to 3WC". [Callee Flash to 3WC]
•
Added feature "RFC2833 Count". [RFC2833 Events Count] [RFC2833 End Events Count]
•
Added feature "Replace Beginning '+' with 00 in Caller ID". [Replace Beginning '+' with 00 in Caller ID]
•
Added feature "Disable Unknown Caller ID". [Disable Unknown Caller ID]
•
Added feature "Disable # as Redial Key". [Disable # as Redial Key]
•
Added feature "Reset Call Features". [Reset Call Features]
•
Added support to view, download, and delete the call history through device Web UI. [CDR File]
•
Added support to store SIP file locally. [SIP File]

Firmware Version 1.0.11.6

•
Added support to display CPU load on the device web STATUS page. [CPU Load]
•
Added support for SIP keep-alive to use SIP NOTIFY. [Enable SIP OPTIONS/NOTIFY Keep Alive]
•
Added feature "Network Cable Status" on Web UI status page. [Network Cable Status]
•
Added support for Management Interface. [Enable Management Interface]
•
Added feature "SSH Idle Timeout". [SSH Idle Timeout]
•
Added feature "Telnet Idle Timeout". [Telnet Idle Timeout]
•
Added feature "Use ARP to detect network connectivity". [Use ARP to detect network connectivity]
•
Added feature "Call Record". [CDR File]

Firmware Version 1.0.10.6

•
Added feature "Inband DTMF Duration". [Inband DTMF Duration]
HT801/HT802 Administration Guide
Version 1.0.13.7
P a g e | 8