Grandstream Networks HT801 Administration Manual page 36

Periodic Inform Interval
Connection Request
Username
Connection Request
Password
CPE SSL Certificate
CPE SSL Private Key
Enable SNMP
SNMP Version
SNMP Port
SNMP Trap IP Address
SNMP Trap port
SNMP Trap Version
SNMP Trap Interval
SNMPv1/v2c Community
SNMPv1/v2c Trap Community Name of SNMPv1/v2c trap community.
SNMPv3 User Name
SNMPv3 Security Level
SNMPv3 Authentication
Protocol
SNMPv3 Privacy Protocol
Sets frequency that the inform packets will be sent out to ACS.
Enters username for ACS to connect to the HT801/HT802.
Enters password for ACS to connect to the HT801/HT802.
Configures the Cert File for the phone adapter to connect to the ACS via
SSL.
Specifies the Cert Key for the phone adapter to connect to the ACS via SSL.
Default is No.
Choose between (Version 1, Version 2c, or Version 3).
Listening Port of SNMP daemon (Default 161).
IP address of trap destination. Up to 3 trap destinations are supported. Users
should enter the IP addresses separated with comma (,).
Port of Trap destination (Default 162)
Choose between (Version 1, Version 2c, or Version 3).
Time interval between traps (Default is 5).
Name of SNMPv1/v2c community.
User name for SNMPv3.
noAuthUser: Users with security level noAuthnoPriv and context name as
noAuth.
authUser: Users with security level authNoPriv and context name as auth.
privUser: Users with security level authPriv and context name as priv.
Select the Authentication Protocol: "None" or "MD5" or "SHA."
Select the Privacy Protocol: "None" or "AES/AES128" or "DES".
HT801/HT802 Administration Guide
Version 1.0.13.7
P a g e | 35