Web Configuration Pages Definitions; Status Page Definitions; Table 6: Status Page Definitions; Figure 8: Web Http(S) Port - Grandstream Networks HT813 Administration Manual

Fxs/fxo port analog telephone adaptor
Hide thumbs Also See for HT813:
Table of Contents

Advertisement

https://arttel.ru/

Web Configuration Pages Definitions

This section describes the options in the HT813 Web UI. As mentioned, you can log in as an administrator
or an end user.
STATUS: Displays the system info, network status, account status, and line options.
BASIC SETTINGS: Configures the end user level password, IP address modes, web access, time
zone settings and language.
ADVANCED SETTINGS: Configures networks, upgrading and provisioning, TR-069, security settings,
date and time, syslog, audio settings, call settings and call progress tones.
FXS PORT: Configures SIP accounts settings.
FXO PORT: Configures SIP accounts settings.

Status Page Definitions

Status
MAC Address
https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813

Figure 8: Web HTTP(S) Port

Table 6: Status Page Definitions

Shows device ID in hexadecimal format. This is needed by network administrators for
troubleshooting. The MAC address will be used for provisioning and can be found on
the label on original box and on the label located on the bottom panel of the device.
Note: The device has two MAC addresses, one for the WAN port and one for the LAN
port. The MAC address located on the bottom panel of the device is the MAC address
of LAN port. The MAC address of WAN port is MAC address of LAN port +1.
Example: MAC Address: WAN - "00:0B:82:25:AF:32", LAN - "00:0B:82:25:AF:31".
HT813 Administration Guide
Version 1.0.1.2
P a g e
|
23

Advertisement

Table of Contents
loading

Table of Contents