Grandstream Networks HT801 Administration Manual page 44

SIP Registration Failure Retry
Wait Time
SIP Registration Failure Retry
Wait Time upon 403
Forbidden
Enable SIP OPTIONS/NOTIFY
Keep Alive
SIP OPTIONS/NOTIFY Keep
Alive Interval
SIP OPTIONS/NOTIFY Keep
Alive Max Lost
Layer 3 QoS
Local SIP Port
Local RTP Port
Use Random SIP Port
Use Random RTP Port
Enable RTCP
Hold Target Before Refer
Sends re-register request after specific time (in seconds) when registration
process fails. Maximum interval is 3600 seconds (1 hour). Default is 20
seconds.
Sends re-register request after specific time (in seconds) when registration
process fails with error 403 Forbidden. Maximum interval is 3600 seconds
(1 hour).
Default is 1200 seconds.
Enables SIP OPTIONS or SIP NOTIFY to track account registration status
so the phone adapter will send periodic OPTIONS/NOTIFY messages to
server to track the connection status with the server. Default setting is No.
Configures the time interval when the phone adapter sends OPTIONS or
NOTIFY messages to the SIP server. The default setting is 30 seconds,
which means the phone adapter will send an OPTIONS/NOTIFY message
to the server every 30 seconds. The default range is 1-64800.
Defines the Number of max lost packets for SIP OPTIONS or SIP NOTIFY
Keep Alive before re-registration. Between 3-10, default is 3.
Defines Diff-Serv values for SIP and RTP. Defaults are:
SIP Diff-Serv: 26; RTP Diff-Serv: 46
Defines local port to use by the HT801/HT802 for listening and transmitting
SIP packets. Default value for FXS 1 is 5060 and 5062 for FXS 2.
Defines the local RTP-RTCP port pair the HT801/HT802 will listen and
transmit. It is the HT801/HT802 RTP port for channel 0. The default value
for FXS port is 5004.
Controls whether to use configured or random SIP ports. This is usually
necessary when multiple HT801/HT802 are behind the same NAT. Default
is No.
Controls whether to use configured or random RTP ports. This is usually
necessary when multiple HT801/HT802 are behind the same NAT. Default
is No.
Allows users to enable RTCP. Default setting is Yes.
Allows user to hold the phone call before referring it. If set to No, the call will
not be hold before referred. Default is Yes.
HT801/HT802 Administration Guide
Version 1.0.13.7
P a g e | 43