Changing Viewer Password; Changing Http Web Port; Figure 8: User Level Password; Figure 9: Viewer Level Password - Grandstream Networks HT801 Administration Manual

Changing Viewer Password

1. Access your HT812/HT814 web UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Basic Settings → New Viewer Password and enter the new viewer password.
5. Confirm the new viewer password.
6. Press Apply at the bottom of the page to save your new settings.

Changing HTTP Web Port

1. Access your HT801/HT802 web UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings and navigate to Basic Settings→Web Port.
4. Change the current port to your desired/new HTTP port. Ports accepted are in range [1-65535].
5. Press Apply at the bottom of the page to save your new settings.

Figure 8: User Level Password

Figure 9: Viewer Level Password

HT801/HT802 Administration Guide
Version 1.0.13.7
P a g e | 24