Grandstream Networks HT801 Administration Manual page 33

Use DNS to detect network
connectivity
Use ARP to detect network
connectivity
Verify host when using
HTTPS
Upgrade via
Firmware Server Path
Config Server Path
XML Config File Password
HTTP/HTTPS FTP/FTPS User
Name
HTTP/HTTPS FTP/FTPS
Password
Firmware File Prefix
Firmware File Postfix
(minimum 3), the device will restart the TCP/IP stack.
If the STUN server does not respond when the device boots up, the feature
is disabled.
Default setting is No.
Uses DNS to detect WAN side network problems.
Default setting is "No".
Uses ARP to check the network connectivity.
Default is "Yes".
Enables / disables the host verification when using HTTPS.
Selects firmware upgrade/provisioning method: TFTP, HTTP, HTTPS, FTP
or FTPS. Default is HTTPS.
Sets IP address or FQDN of firmware server. The URL of the server that
hosts the firmware release. Default is fm.grandstream.com/gs.
Sets IP address or FQDN of configuration server. The URL of the server that
hosts the configuration file to provision HT801/HT802.
Default is fm.grandstream.com/gs.
Decrypts XML configuration file when encrypted. The password used for
encrypting the XML configuration file using OpenSSL.
Enters user name to authenticate with HTTP/HTTPS FTP/FTPS server.
Enters password to authenticate with HTTP/HTTPS FTP/FTPS server.
Checks if firmware file is with matching prefix before downloading it. This
field enables user to store different versions of firmware files in one directory
on the firmware server.
Checks if firmware file is with matching postfix before downloading it.
This field enables user to store different versions of firmware files in one
directory on the firmware server.
HT801/HT802 Administration Guide
Version 1.0.13.7
P a g e | 32