Configuration Guide; Configuring Ht70X Through Voice Prompts; Configuration Via Web Browser; Accessing The Web Ui - Grandstream Networks HT701 User Manual

CONFIGURATION GUIDE

Configuring HT70X through Voice Prompts

DHCP M
ODE
Follow Table 4 with voice menu option 01 to enable HT70X to use DHCP.
STATIC IP M
ODE
Follow Table 4 with voice menu option 01 to enable HT70X to use STATIC IP mode, then use option 02, 03,
04 to set up HT70X's IP, Subnet Mask, Gateway respectively.
F S IP A
IRMWARE ERVER DDRESS
Select voice menu option 13 to configure the IP address of the firmware server.
C S IP A
ONFIGURATION ERVER
Select voice menu option 14 to configure the IP address of the configuration server.
U P
PGRADE ROTOCOL
Select voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose
between TFTP, HTTP and HTTPS.
F U M
IRMWARE PGRADE ODE
Select voice menu option 17 to choose firmware upgrade mode. There are three options:
1) always check, 2) check only when pre/suffix changes, and 3) never upgrade

Configuration via Web Browser

The HT70X embedded Web server responds to HTTP GET/POST requests. Embedded HTML pages allow
a user to configure the HT70X through a web browser such as Google Chrome, Mozilla Firefox and
Microsoft's IE.

Accessing the Web UI

1. Connect the computer to the same network as your HT70X.
2. Make sure the HT70X is booted up.
3. You may check your HT70X IP address using the IVR on the connected phone.
DDRESS
HT70X User manual
Version 1.0.9.4
P a g e | 28