Grandstream Networks HT801 Administration Manual page 39

Blacklist for Incoming Calls
NTP Server
Allow DHCP Option 42 to
override NTP server
DHCP Option 17 Enterprise
Number:
CDR File Option
SIP File Option
Disable Weak TLS Cipher
Suites
Allow users to block incoming calls from specific list of numbers.
Maximum allow 10 SIP numbers and each number should be separated by a
comma (',') in web UI.
Other allowed characters are 0-9, comma (","), asterisk ('*'), pound sign ('#')
and plus sign ('+').
Defines the URL or IP address of the NTP server. The ATA may obtain the
date and time from the server. The default setting is "pool.ntp.org".
Defines whether DHCP Option 42 should override NTP server or not. When
enabled, DHCP Option 42 will override the NTP server if it's set up on the
LAN. The default setting is Yes.
Default is 3561
By default, the device will split the allowed memory for CDR file into 2 parts.
Device will create the first CDR file which is half of the allowed size, when it
is full, device will create the second file.
•
When "CDR File Option" is set to Default "Keep", device will keep the
call records when both files are full, no more new record will be stored.
•
When this feature is set to "Override", device will clear the first CDR
file and start storing again.
The CDR file output will be available at Status page: [CDR File]
By default, the device will split the allowed memory for SIP file into 2 parts.
Device will create the first SIP file which is half of the allowed size, when it is
full, device will create the second file.
•
When "SIP File Option" is set to Default "Keep", device will keep the
call records when both files are full, no more new record will be stored.
•
When this feature is set to "Override", device will clear the first SIP
file and start storing again.
The SIP file output will be available at Status page: [SIP File]
Note: "Send SIP Log" must be enabled to be able to capture the trace.
Allows users to disable weak ciphers DES/3DES and RC4. Default is No.
HT801/HT802 Administration Guide
Version 1.0.13.7
P a g e | 38