Grundfos CIM 200 Functional Profile And User Manual page 59

2. Login
For administration of username and password, see also
If you experience problems with logging in to the
webserver after a firmware update, perform a factory
reset.
Fig. 2 Login
Object Description
Enter username.
Username
Default: admin.
Enter password. Default: Grundfos.
After the first log in, you are forced to change the password.
The password must contain:
• at least 8 and maximum 20 characters
Password • at least one lower case letter
• at least one upper case letter
• at least one numeric or special character.
When logging
between each attempt. Power cycling CIM 500 resets the back-off algorithm.
User Management.
in, you have four attempts before a back-off algorithm starts an exponentially increasing time delay
59