Table of Contents
Advertisement
Section 3: Controlling and Customizing Stainer Functions
Manually Entering Specimen Information
With Stain Slide Tracking and Manual Entry enabled in the QC Maintenance menu:
1. Press Load Slides on the Main menu.
2. Press Add to reveal the keypad.
3. Enter slide information (maximum of 24 characters) and press Enter.
4. To change or delete the entry, select the entry on the display and press Edit or Remove.
5. Load slides and run stain cycle as shown in Section 4.1.
Manually Entering Reagent Information
1. Press Reagents from the System Setup menu or press the reagent status icon on the Main menu to
reveal the Reagent Information menu.
2. Select the desired reagent and press Change.
3. Press the desired field (Reagent REF, Expiration Date, or Lot Number (Serviced Date/Time
automatically gets entered); enter the information on the keypad and press Enter.
NOTE: Reagent REF number must be a valid ELITechGroup REF number for the selected reagent.
Incorrect entries will generate an error message.
4. When all the information has been entered, press Save.
43
43
Advertisement
Table of Contents
