Table of Contents
Advertisement
Section 3: Controlling and Customizing Stainer Functions
3.2 Recording Specimen and Reagent Information
Scanning Slides with the Barcode Reader
1. From System Setup select QC/Maintenance Tracking.
2. Select Enable Stain Slide Tracking.
NOTE: Selecting Enable Stain Slide Tracking changes the Start button on the Main menu to "Load Slides."
See Scanning Slides with the Barcode Reader.
3. Press Back twice to return to the Main menu.
4. Press Load Slides on the Main menu. The Scan and Load Slides menu will appear.
5. Scan the barcode of each slide in the batch and load into the carousel according to instructions in
Section 4.1.
6. Verify that each barcode appears on the Scan and Load Slides menu.
7. When preparations to stain have been completed, (Section 4) press Start.
Scanning Reagent Bottles with the Barcode Reader
1. From System Setup select QC/Maintenance Tracking.
41
41
Advertisement
Table of Contents
