Table of Contents
Advertisement
Section 3: Controlling and Customizing Stainer Functions
4. Press Load Slides. The Scan and Load Slides menu appears.
5. Enter slide information.
A. If using the barcode reader, scan the specimen slides that contain barcodes. See Scanning
Slides with the Barcode Reader (Section 3.2) for complete instructions.
B. If entering specimen information manually, see Manually Entering Specimen Information (Section
3.2).
6. See Section 4 for remaining steps for running a stain cycle.
Enable Cyto Slide Tracking
Allows slide tracking in cytocentrifuge mode. See the Cytopro Rotor Applications Manual for complete
information.
Enable Manual Entry
If selected, allows manual entry of slide information using the keypad (limited to 24 characters).
Enable Preventive Maintenance Tracking
To activate the tracking prompts for Preventive Maintenance Tracking, use the following steps:
1. From System Setup, select QC/Maintenance Tracking.
2. Select Enable Preventive Maintenance Tracking.
39
39
Advertisement
Table of Contents
