Table of Contents
Advertisement
Section 3: Controlling and Customizing Stainer Functions
Creating a Stain Program
1. From System Setup, press Stain Programs. Depending upon how many stain programs have been
added, an existing program may need to be erased to remain within the 12-program limit.
2. Press Add.
3. Select the desired Stain Mode (Progressive or Regressive) and Nuclear/Htox and Cytoplasmic/EA
Intensity, then press Continue.
NOTE: Staining programming options are determined by the chosen stain mode. See Appendix D for
additional information.
4. Select the General tab and set the desired program settings.
5. Select the Intensity tab and set the desired program settings.
31
31
Advertisement
Table of Contents
