Connecting The Capillary; Omnistar; Thermostar - Pfeiffer Vacuum OmniStar GSD 300 O1 Operating Manual

3.6 Connecting the Capillary

3.6.1 OmniStar™

Minimum bending radius 150 mm.
Do not additionally insulate or cover the heating tube.
Do not supply any additional heat (for example, heated
flange).
Connect the capillary to your measurement point
Firmly connect the front tip of the
tube to the measurement equipment.
Clamp only the part of the tube which
contains a metal bush.
12 Installation
Remove the tap

3.6.2 ThermoStar™

Minimum bending radius 150 mm.
Do not additionally insulate or cover the heating tube.
Do not supply any additional heat (for example, heated
flange).
Remove the adhesive tape
Unlock the cover
BG 805 071 BE (9904) GSD300.om