Power Connection - Pfeiffer Vacuum OmniStar GSD 300 O1 Operating Manual

3.8 Power Connection

Turn off the power switch
Make sure that the ratings on the nameplate agree with the local line voltage.
WEIGHT 45 kg
F3 F2 F1
2,5 AT 2,5 AT 0,8 AT
Connect the unit
BG 805 071 BE (9904) GSD300.om
Pfeiffer-
Vacuum
If the values do not agree, please contact your Pfeiffer Vacuum partner
The power connector may only be plugged into a socket with a
protective ground. Only three-pin mains cables with a correctly
connected protective ground may be used. This protection must
not be nullified by an extension cable without ground conductor.
Installation 17