4 Initial Start up
If for any reason you can assume that the unit is not safe
to operate, shut it down and secure it so that it cannot be
inadvertently turned on again.
You can assume that the unit is not safe to operate when:
•
it has sustained visible damage
•
it no longer functions
•
it has been stored for a longer period under
unfavorable conditions
•
it has been subjected to severe transport stress
4.1 Switching on
Precondition
•
→
Installation completed (
Procedure
Turn the mains switch on
<power>
Wait until the turbo pump has attained 90% of the
nominal speed
<ready>
During operation avoid excessive shocks to the
GSD 300. Do not transport the unit while the turbo
pump is running.
18
Initial start up
2
8 and subsequent)
BG 805 071 BE
(9904) GSD300.om