ABB PowerScale CABINET A User Manual page 48

1 PMD
2 USB
3 JD1/RS232 Sub D9/female
4 X1
5 X2
6 JR1/RS485 on RJ 45 port
7 SW1-9
8 JD8
ONLY For paralleling cabinets use optional adapter:
JD5
JD6
9 SNMP
10 Modem
Power Management Display (PMD) of POWERSCALE
PC Interface (Slot 1 Option)
Interface (UPS system to computer) (see section 3 / 1.1)
Customer Inputs
Customer interface on Phoenix Terminals (Slot 1 Option):
X2= Potential free contacts (detail see Section 3 / 1.2 )
Interface for Multidrop connection between several UPS
cabinets (see Section 3)
Multi-Cabinet Configuration Switch (see section 4)
Parallel BUS connector (Option)
Parallel BUS - Input Connector
Parallel BUS - Output Connector
Slot for optional SNMP card ONLY
Slot for optional Modem/Ethernet card ONLY
04-3004_S3_OPM_ABB_POWERSCALE_10-50kVA_EN_150113.doc
Printed in Switzerland – Modifications reserved
Section-3
Page 5/6 ABB