Nameplate And Identification - ABB PowerScale CABINET A User Manual

By unpacking the equipment from the wooden case remove all screws.

1.3.4 NAMEPLATE AND IDENTIFICATION

The technical specifications of the Equipment are provided on the nameplate of the UPS. Check if it corresponds to
the purchased material mentioned in the delivery note. For cabinets A&B the nameplate will be positioned on the
rear side, for cabinet C at the front behind the cover.
TYPE PRODUCT DESCRIPTION
PS1 PowerScale 10-20 kVA
PS2 PowerScale 10-25 kVA
PS3 PowerScale 25-50 kVA
Bottom screws
04-3004_S1_OPM_ABB_POWERSCALE_10-50kVA_EN_150113.doc
Printed in Switzerland – Modifications reserved
Sides screws
DIMENSIONS
Cabinet A (345x720x710mm)
Cabinet B (345x1045x710mm)
Cabinet C (440x1400x910mm)
Section-1
Page 11/20 ABB