Siemens SINUMERIK 840D sl Programming Manual page 811

Example
Generating a contour table with:
● Name "KTAB"
● Contour elements (circles, straight lines)
● Mode: Turning
● Machining direction: Upwards
NC program:
Program code
N10 DEF REAL KTAB[9,6]
N20 DEF INT MODE = 0
N30 DEF INT ERROR = 0
...
Job Planning
Programming Manual, 06/2009, 6FC5398-2BP20-0BA0
User stock removal programs
15.3 Generate coded contour table (CONTDCON)
Comments
; Contour table with name KTAB and
9 table cells. These allow 8
contour sets. The parameter
value 6 (column number in table)
is a fixed size.
; Variable for the machining
direction. Standard value 0:
Only in the programmed direction
of the contour.
; Variable for the fault feedback
signal.
811