5.5
Preset offset (PRESETON)
5.5
Function
In special applications, it can be necessary to assign a new programmed actual value to one
or more axes at the current position (stationary).
The reference point becomes invalid with the function PRESETON. You should therefore
only use this function for axes which do not require a reference point. If the original system
is to be restored, the reference point must be approached with G74 – see the "File and
Program Management" section.
Syntax
PRESETON(axis, value)
Significance
PRESETON
Axis
Value
Note
Preset mode with synchronized actions should only be implemented with the keyword
"WHEN" or "EVERY".
Job Planning
Programming Manual, 06/2009, 6FC5398-2BP20-0BA0
CAUTION
Preset actual value memory
Machine axis parameter
New actual value to apply to the specified axis
Coordinate transformation (FRAMES)
5.5 Preset offset (PRESETON)
333