Replace Fibre Channel Cable; Replace Fibre Channel Device - ADIC Scalar 1000 User Manual

Step 3.

Replace Fibre Channel Cable

Step 1.
Step 2.
Step 3.
Step 4.
Step 5.

Replace Fibre Channel Device

The device that needs to be replaced is one of the following:
• Fibre Channel HBA
• Fibre Channel Switch
• Fibre Channel Hub
6-00020-02
SNC 5100
For more information, see
192.
If the test passes, the Fibre Channel optical cable is good.
Go to "Replace Fibre Channel
If the test fails, go to
Replace the cables to the Fibre Channel ports with known good
cables.
Perform Health Check.
For more information, see "Perform Health Check" on page 46.
View the event log at viewing level 3.
For more information, see Table 9, "Event Viewing Levels," on
page 42.
If problems persist, inform the network administrator that there
seems to be a problem with a device or a host bus adapter.
If problems are gone, exit this MAP.
Replace external devices that are attached to the Fibre Channel
ports.
Go to "Replace Fibre Channel
"fcSlotTest [x]"
Device".
"Replace Fibre Channel
Device".
command on page
Cable".
Fibre Channel MAP 65