Adding A Host System Running Timeserver - ADIC Scalar 1000 User Manual

Example:
SN60023> tzSet "EST"
TZ Set TIMEZONE = EST:EDT:300:040202:101502
value = 0 = 0x0
SN60023 >
Step 4.
Example:
SN60023 > date
SN60023 > FRI JAN 26 9:30:49 2001
SN60023 >

Adding a Host System Running Timeserver

Step 1.
Example:
SN60023 > setNettime 1
Nettime 1 value = 0 = 0x0
SN60023 >
Step 2.
102 Setting the Time and Date
SNC 5100
For more information, see the
page 183.
Use the command to confirm.
date
For more information, see the
Caution
Use 24 hour time when programming the real time clock.
Caution
The time will be 1 hour off while Daylight Savings time is in effect.
To enable the timeserver functionality use the
command.
For more information, see the
on page 163.
Add a Host running timeserver to the SNC 5100 using the
command.
setTimeHost
"tzSet "timezone""
command on page 115.
"date"
setNettime
"setNettime [value]"
command on
command
6-00020-02