Fusing Requirements; Environmental Notices And Statements; Product Recycling; Lithium Battery - ADIC Scalar 1000 User Manual

Step 2.
Step 3.

Fusing Requirements

The SNC 5100 power supply has a 3.15 A, 250 VAC time delay fuse on the AC
line input, and the AC harness uses an axial lead, 3A, 250 VAC time delay fuse
in the neutral line. There are no user-serviceable parts in the SNC 5100.

Environmental Notices and Statements

Product Recycling

This unit contains recyclable materials. These materials should be recycled
where processing sites are available and according to local regulations.

Lithium Battery

DANGER
Risk of fire, explosion, or burns. Do not short circuit, crush, heat above 100 C,
incinerate, or disassemble the battery.

Laser Safety

This unit may contain a single-mode or multi-mode transceiver, both of which
are Class 1 laser products. The transceiver complies with IEC 825-1 and FDA
21 CFR 1040.10 and 1040.11. The transceiver must be operated under the
recommended operating conditions.
6-00020-02
SNC 5100
Check the voltage label on the bottom of the device to ensure it
matches the voltage at the power source.
Check the voltage level at the power source.
Environmental Notices and Statements 3