Adic Limited Product Warranty - ADIC Scalar 1000 User Manual

For the scalar 1000 and 10k
Hide thumbs Also See for Scalar 1000:
Table of Contents

Advertisement

Warranty and EULA

ADIC Limited Product Warranty

1. Subject to the limitations set forth below, ADIC warrants to Buyer as
b.) For 3 years from the date of delivery to Buyer, all hardware products
manufactured by ADIC (hereafter Products), excluding drives and media
manufactured by third parties, which are covered by paragraph (c) below,
will be capable of performing substantially in accordance with the
applicable specifications for such Products stated in documentation
supplied by ADIC;
c.) All hardware repairs made by ADIC will be free from defects in
material and workmanship for the greater of the original warranty period
or 3 months from the date such repairs are made; and
d.) With respect to drives, tapes, and software manufactured by a third
party, which are supplied by ADIC, Buyer will be the beneficiary of the
manufacturer's warranties, if any, SUBJECT TO THE LIMITATIONS
STATED THEREIN. Copies of such manufacturer's warranties will be
made available to Buyer upon request. ADIC DISCLAIMS AND
EXCLUDES ALL WARRANTIES WITH RESPECT TO SUCH ITEMS.
2. The foregoing warranties will be voided if the Products are not properly
3. If a defect is found and reported to ADIC in writing within the warranty
6-00020-02
SNC 5100
follows:
installed, serviced, used, or maintained according to ADIC's printed
instructions or if the Products have been damaged or modified after
delivery. Buyer assumes responsibility for the selection of the
Products for the uses for which they are purchased.
period, ADIC will, in its sole discretion and as its sole responsibility
and liability and as BUYER'S SOLE AND EXCLUSIVE REMEDY
for breach of warranty, either repair or replace the nonconforming
Product or accept the return thereof and refund to Buyer the price
paid to ADIC for such nonconforming Product. ADIC will respond
to Buyer's request for return material authorization within 72 hours
of Buyer's notice. All warranty repair work or inspections must be
performed at an ADIC facility designated by ADIC. Shipment to
ADIC's facility and all risk of loss or damage during shipment shall
be borne by, or for the account of, Buyer.
ADIC Limited Product Warranty
211

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scalar 10kSnc 5100

Table of Contents