Disabling The Timeserver Host - ADIC Scalar 1000 User Manual

Example:
SN60023 > setTimeHost "butter"
Time Host butter value = 0 = 0x0
SN60023 >
Step 3.
Example:
SN60023 > rdate "butter"
Get time from butter using UDP/SNTP
value = 0 = 0x0
SN60023 >
Step 4.
Example:
SN60023 > tzSet "EST" TZ Set TIMEZONE =
EST:EDT:300:040202:101502 value = 0 = 0x0
SN60023 >
Step 5.
Example:
SN60023 > date WED JUL 18 14:51:59 2001 value = 0 = 0x0
SN60023 >

Disabling the Timeserver Host

Step 1.
6-00020-02
SNC 5100
For more information, see the
164.
Set the remote system as the source of date/time display using the
command.
rdate
For more information, see the
on page 150.
4. Use the tzSet command to set the timezone
In the following example, EST is used for Eastern Standard Time.
5. To confirm, use the date command.
For more information, see the
To disable the timeserver functionality, use the
command.
command on page
"setTimeHost"
"rdate "timeserver""
command on page 115.
"date"
setNettime
Setting the Time and Date
command
103