Mounting The Engine - Seagull Models SEA 358 Assembly Manual

6.
7.
8.
Fuel pick up tube
Connect the lines from the tank to the
engine and muler. he vent line will
connect to the muler and the line from
the clunk tothe carburetor.
Blow through one of the lines to ensure
the fuel lines have not become kinked inside
the fuel tank compartment. Air should low
through easily.
M4 Nylon
Vent tube
Fuel ill tube

MOUNTING THE ENGINE

Please study images below.
1.
Locate the engine mounting in position on
the irewall. Use a 2.5mm drill bit to drill the
holes necessary to mount your particular
motor choice.
2.
2.5mm
3.
17