Table of Contents
Advertisement
1/3 ScaleMorane Saulnier AI
11.
Set the aileron hatch in place and use a
Phillips screw driver to install it with four
wood screws.
12.
M2.5x10mm
13.
AILERON PUSHROD INSTALLATION
Please study images below.
8
Instruction Manual.
1.
2.
75mm
3.
M3 clevis
4.
INSTALLING THE FUSELAGE SERVOS
Because the size of servos difer, you
may need to adjust the size of the precut
opening in the mount. he notch in the
sides of the mount allow the servo lead to
pass through.
Install the rubber grommets and brass
collets into all servos. Test it the servos
into the fuselage servo mounts.
Secure the servos with the screws
provided with your radio system.
M3 lock nut
.
.
Advertisement
Table of Contents
