Table of Contents
Advertisement
ELEVATOR PUSHROD
INSTALLATION
Install the elevator control horn using
the same method as with the aileron
control horns.
Position the elevator control horn on
the both side of elevator.
1.
hread one clevis and M2 lock nut on
to each elevator control rod. hread the
horns on until they are lush with the
ends of the control rods.
Elevator and rudder pushrods assembly
as pictures below.
2.
Locate items necessaryto install rudder
pushrod.
3.
715mm
4.
M3 clevis
5.
6.
RUDDER PUSHROD
INSTALLATION
Repeat steps as same as steps done for
elevator.
1.
M3 lock nut
31
Advertisement
Table of Contents
