Recommended Service Intervals; Record Your Settings; Torque Values - SRAM Rockshox Judy Series Service Manual

R e c o m m e n d e d S e r v i c e I n t e r v a l s
Regular service is required to keep your RockShox product working at peak performance. Follow this maintenance schedule and install the service
parts included in each service kit that corresponds with the Service Hours Interval recommendation below. For spare part kit contents and details,
refer to the RockShox Spare Parts Catalog at www.sram.com/service.
Service Hours Interval
Every ride
Every 50 Hours
Every 200 Hours
R e c o r d Y o u r S e t t i n g s
Use the table below to record your suspension settings to return your suspension to its pre-service settings. Record your service dates to track
service intervals.
Service Hours Interval
50
100
150
200
T o r q u e V a l u e s
Part
Bottom bolts
Pinch bolt - remote cable stop clamp
(2018 Recon Gold RL R)
Retaining screw - coil spring preload adjuster knob, compression knob,
and remote spool
Set screw - remote cable stop collar
(2018-2019 Judy Gold RL R / 2019 30 Gold RL R / 2019 Recon Gold RL R)
Set screw - remote cable stop collar
(2020-2021 Judy Gold RL R / 2020-2021 Judy Silver TK R /
2020 30 Gold RL R / 30 Silver TK R / 2020-2021 Recon Gold RL R /
2020-2021 Recon RL R / 2020-2021 Recon TK R)
Top caps
Maintenance
Clean dirt from upper tubes and wiper seals
Perform lower leg service
Perform damper and spring service
Date of Service
Benefit
Extends wiper seal lifespan
Minimizes damage to upper tubes
Minimizes lower leg contamination
Restores small bump sensitivity
Reduces friction
Extends bushing lifespan
Extends suspension lifespan
Restores small bump sensitivity
Restores damping performance
Air Pressure
Tool
5 mm hex bit socket
2 mm hex bit socket
2.5 mm hex bit socket
2 mm hex bit socket
2 mm hex bit socket
24 mm socket
Rebound setting - Count the
number of clicks while turn-
ing the rebound adjuster fully
counter-clockwise.
Torque
6.8 N•m (60 in-lb)
0.6-1.1 N•m (6-10 in-lb)
1.4 N•m (12 in-lb)
0.25-0.6 N•m (2.2-5.3 in-lb)
Finger Tight or
0.1-0.3 N•m (0.8-2.6 in-lb)
12.4 N•m (110 in-lb)

Recommended Service Intervals

8