SRAM Rockshox Judy Series Service Manual page 30

4 Soak the new foam rings in suspension oil. Install the new foam rings.
5
Remove the outer wire spring from each new seal and set them aside.
6 Insert the narrow end of a new seal into the recessed end of the
RockShox Dust Seal Installation tool.
Judy / 30: 28 mm / 30 mm Dust Seal Installation Tool
Recon: 32 mm Dust Seal Installation Tool
Recon: If the RockShox x Abbey Bike Tools installation tool is used,
confirm the 32 mm installation puck is tightened hand tight on the
installation tool handle to avoid damage to the installation puck
during use.
NOTI CE
15wt
Dust Seal Installation Tool
Abbey Bike Tools 32 mm Dust Seal Installation Tool
30
Lower Leg Seal Service