SRAM Rockshox Judy Series Service Manual page 85

6 Crown Adjust and 2019-2021 RL R / TK R: Thread the top cap into the
upper tube and tighten it to the specified torque. Press down firmly
when tightening the top cap.
7
Crown Adjust - Recon RL: Apply a thin layer of grease onto the top cap
detents.
Install the detent spring.
8 Crown Adjust - RL / TK: Install the compression adjuster knob with the
tab in the 7-8 o'clock, unlocked position.
24 mm
2018
2019-2021
Compression Damper Installation
12.4 N·m (110 in-lb)
85