SRAM Rockshox Judy Series Service Manual page 70

5 Insert the compression damper into the upper tube. Press down slowly
and rotate in a circular motion until the damper is installed.
Remote - 2018 30 Gold RL R: Position the remote cable stop to the
forward position.
6 Thread the top cap into the upper tube and tighten it. Press down
firmly when tightening the top cap.
7 Crown Adjust - Recon Gold RL: Apply a thin layer of grease onto the
top cap detents.
Install the detent spring.
2018 30 Gold RL R
24 mm
24 mm
Compression Damper Installation
12.4 N·m (110 in-lb)
70