SRAM Rockshox Judy Series Service Manual page 73

9c Remote - 2020-2021 Judy Gold RL R / 2020 30 Gold RL R /
2020-2021 Recon Gold RL R: Install the cable stop collar with the
housing guide in the forward position 20 degrees from center.
Tighten the set screw finger tight, or to the specified torque. Confirm
the cable stop does not feel loose or have any free play.
To avoid permanent damage to the set screw threads, do not over-
tighten the set screw.
Install the remote spool (A) onto the hex adjuster with the cable set
screw (B) 20-40 degrees from the edge of the cable stop groove,
towards the front of the crown.
Install and tighten the retaining screw.
Consult the applicable remote user manual at
200 Hour Service Continue the 200 Hour Service with
NOTI CE
www.sram.com/en/rockshox/products/remotes
Lower Leg
2 mm 0.1-0.3 N·m (1.8-2.6 in-lb)
2 mm 0.1-0.3 N·m (1.8-2.6 in-lb)
2,5 mm
2.5 mm
for cable and remote installation instructions.
Installation.
20°-40°
B
20°
A
2020
20°-40°
B
20°
A
2021
2.5 mm 1.4 N·m (12 in-lb)
2020
2.5 mm 1.4 N·m (12 in-lb)
2021
Compression Damper Installation
73