SRAM Rockshox Judy Series Service Manual page 31

7 Stabilize the lower leg on a bench top. Hold the lower leg steady and
press the seal into the lower leg until the top of the seal is flush with
the top of the lower leg.
Repeat on the other side.
Only press the seal into the lower leg until it is flush with the top
surface of the lower leg. Pressing the wiper seal below the top
surface of the lower leg will compress the foam rings.
8 Install the outer wire springs.
Apply SRAM Butter grease to the inner surfaces of the wiper seals.
NOTI CE
Dust Seal Installation Tool
Abbey Bike Tools 32 mm Dust Seal Installation Tool
SRAM Butter Grease
31
Lower Leg Seal Service