Recommended Service Intervals; Record Your Settings; Torque Values - SRAM ROCKSHOX RUDY XPLR Service Manual

R e c o m m e n d e d S e r v i c e I n t e r v a l s
Regular service is required to keep your RockShox product working at peak performance. Follow this maintenance schedule and install the service
parts included in each service kit that corresponds with the Service Hours Interval recommendation below. For spare part kit contents and details,
refer to the RockShox Spare Parts Catalog at www.sram.com/service.
Service Hours Interval
Every ride
Every 50 Hours
Every 200 Hours
R e c o r d Y o u r S e t t i n g s
Use the charts below to record your settings to return your fork to its pre-service settings. Record your service date to track
service intervals.
Service Hours
Date of Service
Interval
50
100
150
200
T o r q u e V a l u e s
Part
Air side bottom bolt
Damper side - rebound bottom nut
Top caps
Maxle inserts (reverse threaded)
Race Day Damper lockout adjuster knob retaining screw
Race Day Damper bleed screw
Air stud
Maintenance
Clean dirt from upper tubes and
wiper seals.
Perform lower leg service
Perform damper and spring service
Air Pressure
Tool
5 mm hex bit socket (minimum 110 mm length)
5 mm hex bit socket (minimum 110 mm length)
Top cap/cassette tool
8 mm and 11 mm hex bit sockets
2 mm
T10 TORX
14 mm socket
Benefit
Extends wiper seal lifespan
Minimizes damage to upper tubes
Minimizes lower leg contamination
Restores small bump sensitivity
Reduces friction
Extends bushing lifespan
Extends suspension lifespan
Restores small bump sensitivity
Restores damping performance
Rebound setting - count the
number of clicks while turning the
rebound adjuster fully counter-
clockwise.
Charger Damper Only
Low-speed Compression setting
- count the number of clicks while
turning the compression adjuster
fully counter-clockwise.
Torque
7.5 N·m (66 in-lb)
4 N·m (35 in-lb)
28 N·m (250 in-lb)
8 N·m (70 in-lb)
0.4 N·m (3 in-lb)
1.7 N·m (15 in-lb)
3 N·m (26 in-lb)

Recommended Service Intervals

7