SRAM Rockshox Judy Series Service Manual page 84

4 Insert the compression damper into the upper tube. Press down slowly
and rotate in a circular motion until the damper is installed.
Remote - 2018 Judy Silver TK R / 2018 30 Silver TK R /
2018 RL R / TK R
2018 Recon RL R / 2018 Recon TK R: Before installing the
compression damper, Install and position the remote cable stop under
the compression damper top cap and orient the stop forward. Proceed
to step 6.
2018 RL R / TK R
5 Remote - 2018 30 Silver TK R / 2018 Recon RL R /
2018 Judy TK R
2018 Recon TK R: Orient the remote cable stop with the housing guide
20°-30°
in the forward 4 o'clock position.
2018 Judy Silver TK R: Orient the remote cable stop with the housing
guide in the forward 6 o'clock position, angled ≈20°-30° degrees from
center.
Thread the damper top cap into the upper tube.
2018 30 TK R / Recon RL R / Recon TK R
Tighten the top cap.
24 mm 12.4 N·m (110 in-lb)
84
Compression Damper Installation