SRAM Rockshox Judy Series Service Manual page 34

5 Firmly pull on the air shaft to remove the air spring assembly from the
upper tube.
6 80 mm - 120 mm: Remove the seal head base plate assembly,
All-Travel spacer if installed (not pictured), and the top out bumper.
Clean and inspect the shaft for damage.
130 mm - 150 mm: Remove the base plate, wave spring, retaining
washer, seal head bumper, All-Travel spacer if installed (not pictured),
floating seal head, and top out bumper.
Clean and inspect the shaft for damage.
Scratches on the air spring shaft can cause air to leak. If a scratch is
visible the air spring assembly may need to be replaced.
NOTI CE
80 mm - 120 mm
130 mm - 150 mm
130 mm - 150 mm
Air Spring Removal and Service - Gold
80 mm - 120 mm
130 mm - 150 mm
130 mm - 150 mm
34