SRAM Rockshox Judy Series Service Manual page 33

3 (A): Place the tips of large retaining ring pliers into the eyelets of the
retaining ring. Press firmly on the pliers to push the base plate into
the upper tube enough to compress and remove the retaining ring.
Remove the retaining ring. Use your finger to guide the retaining ring
over the air spring shaft.
(B): Push the seal head tab into the upper tube and under the retaining
ring. Place the tips of large retaining ring pliers into the eyelets of the
retaining ring. Remove the retaining ring. Use your finger to guide the
retaining ring over the air spring shaft.
Do not scratch the air spring shaft. Scratches on the air shaft will
allow air to bypass the seal head into the lower leg, resulting in
reduced spring performance.
4 Thread the shaft bolt into the end of the air spring shaft and pull the
shaft out to full extension.
Remove the bolt.
NOTI CE
A
Retaining ring pliers
B
Flat blade screwdriver
Retaining ring pliers
Air Spring Removal and Service - Gold
Retaining ring pliers
33