How To Replace The Vacuum Fan - GRAPHTEC FC8600-60 Service Manual

6 DISASSEMBLY AND REASSEMBLY

6.2.13 How to Replace the Vacuum Fan

How to detach the vacuum fan
(1) Detach the front guide (see Subsection 6.1.5).
(2) Disconnect the vacuum fan from the relay connector.
Vacuum fan
Relay connector
(3) Use a long screwdriver to remove the two M3L35 binding head screws holding the vacuum fan as
shown in the figure below.
Vacuum fan
(4) Detach the vacuum fan.
How to reinstall the vacuum fan
(1) Reattach in the reverse order in which it was detached.
FC8600-UM-251-9370 6-24