GRAPHTEC FC8600-60 Service Manual page 3

No. Date issued
1 13.2.22
2 14.6.18 The rank of items 10 and 15, 16 were changed to A rank.
3 14.6.18 Parts name was corrected for item number 35.
4 14.6.18 The rank of Pinch Roller Base was changed to B rank.
5 14.6.18 Parts number of Drive Pulley Assy was corrected.
6 14.6.18 The rank of I/F Panel LAN was changed to D rank.
7 14.6.18 Parts number of End Cap was added.
8 14.6.18 The rank of Cam Shaft was changed to C rank.
9 14.7.23 Parts number of Drive Pulley Assy was corrected.
10 14.8.27 Parts number of Center Covers were corrected.
11 14.8.27
Quantity of Push Roller Positioning Label S for the FC8600-60 and FC8600-75 were corrected.
12 14.8.27 The rank of labels were changed to C rank except I/F labels.
13 14.11.18 Parts number for LED Base was added.
14 14.11.18 The construction of Pen Block Assembly was corrected.
15 15.02.24 Parts number for Fan was corrected.
16 15.04.28 Item number of Paper Hold down A and B were corrected.
17 15.05.21 The procedure of distance adjustment was corrected.
18 15.08.04 The procedure of distance adjustment was corrected.
19 15.10.20 The procedure of the Tool 2 and the Cross Cutter Threshold adjustment was added.
FC8600-UM-251-9370
HISTORY OF REVISIONS
Description of revision
First Printing
I
Page Edition
All 01
9-8 02
9-11 02
9-10 02
9-11 02
9-1 02
9-15 02
9-10 02
9-10 03
9-1 04
9-14 04
9-14 04
9-4 05
9-5 05
9-1 05
9-6 05
7-22 to 7-24 05
7-23 to 7-24 06
7-40 to 7-41 07