GRAPHTEC FC8600-60 Service Manual page 17

(2) Insert 2 basket tubes (short) into the mount from the side without the cap� Assemble 2 sets as shown
below�
(3) Connect the basket tubes (short) to the joints inserted on the basket tubes (long) at the end of the
basket attached in step 1�
Mounting position of the center basket pipe (long) depends on the loading direction�
(4) Fix the part assembled in 3 to the stand using the socket head cap screws� Assembly is completed by
separating basket to front and back of the center bar�
FC8600-UM-251-9370
Mount
Cap
For front
loading
For rear
loading
Joint
Basket tube (long)
Socket head
cap screw
2 PARTS NAMES and FUNCTIONS
Basket tube (short)
Cloth basket
Center bar
Stand
Socke thead
cap screw
2-7