Installing The Stakmax Instrument - Molecular Devices StakMax User Manual

Installation and Setup of the StakMax System
30

Installing the StakMax Instrument

Note: The photographs used for this procedure are for a side-by-side
installation.
To install the StakMax instrument
1. Use the 3.0 mm hex key screwdriver to attach the alignment
studs to the outermost holes on the StakMax mounting bracket.
See Figure
1
Figure 1-16 Attaching the alignment studs
Item
1
2
3
1-16.
Description
Installed Alignment Stud
Unused Hole in Bracket
Installed Alignment Stud
3
2
5012878 A